RadioLink RC8X User Manual

RadioLink Electronic Limited
www.radiolink.com
6
as same as the mobile phone.
It is packed with the R8FG receiver, with built-in gyro and supports high voltage servo, which
is capable of RSSI, receiver, and model battery voltage telemetry.
RC8X is capable of an arbitrary ID designation among a maximum of 10 binding receivers
and can keep a maximum of 200 pieces model parameters saved.
Setting Menu, font, desktop, system theme, etc., can be customized, you can achieve a
totally unique 8 channels transmitter without one code to modify.
Multiple Programmable Mix Control such as 4WS, 4WD, Tank mixing, Tilt mixing, CPS mixing
etc.
RC8X, with steering curve, throttle curve, brake curve, etc., that is an ideal partner for all
types RC cars and boats in the market including single-engine and twin-engine models such as
Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting RC Car, Gasoline
RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car, GP RC Car, EP RC Car and other types of
RC cars or boats.
1.2.2 Specifications
RC8X Transmitter
Dimensions
L*W*H: 121*163*109mm(4.76”*6.42”*4.29”)
Weight
438.5g(15.47oz)
Model Types
Car (Including Crawlers/Tanks/Caterpillars)/Boat/Robot
Channels
8 channels

RadioLink RC8X Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Telemetry	Yes
Spreading Spectrum	DSSS
Antenna Type	Dual Antenna
Output Signal	PWM, PPM, SBUS
Low Voltage Alert	Yes
Simulator	Yes
Battery Type	LiPo
Voice Alerts	Yes
Display	3.5 inch color screen, 320*480 resolution
Frequency Band	2.4GHz
Operating Voltage	3.5-4.2V
Channel Resolution	4096
Model Type	Helicopter, Airplane, Glider, Multirotor
Compatible Receivers	R8EF, R6FG, R4FGM, R4F
Battery	3.7V 3000mAh LiPo