RadioLink RC8X User Manual

RadioLink Electronic Limited
www.radiolink.com
137
2.8.3 Note for SD card content modification
1) Do not modify, delete, or preview files directly in the RC8X. A type-c USB cable is needed
to connect the RC8X and the computer to view and modify the files on the computer.
2) All filenames in the SD card only support English. If you change the filename to other
languages, the filename will display garbled characters.
3) If the SD card is pulled out and then insert into the RC8X, the RC8X needs to be restarted
to see the modified contents in the SD card.
2.9 Information
2.9.1 User name
The user name is default RADIO LINK, can be renamed, click the button “RADIO LINK”, a
keyboard will pop out, click “Delete” to delete the original name, tap “←” or “→” to move
the cursor and select the character of the model name you want to set or change, click “Confirm”
at the bottom of the screen to save the setting.
2.9.2 Language
System language, it defaults “English”, “English” and “simplified Chinese” can be
selected now.

RadioLink RC8X Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Telemetry	Yes
Spreading Spectrum	DSSS
Antenna Type	Dual Antenna
Output Signal	PWM, PPM, SBUS
Low Voltage Alert	Yes
Simulator	Yes
Battery Type	LiPo
Voice Alerts	Yes
Display	3.5 inch color screen, 320*480 resolution
Frequency Band	2.4GHz
Operating Voltage	3.5-4.2V
Channel Resolution	4096
Model Type	Helicopter, Airplane, Glider, Multirotor
Compatible Receivers	R8EF, R6FG, R4FGM, R4F
Battery	3.7V 3000mAh LiPo