RadioLink Electronic Limited
www.radiolink.com
2.1.3 Backlight
Brightness (Always on): the maximum value of brightness is defaults 100%, tap the value
button to adjust the backlight brightness, click “-“ to decrease the brightness and click “+”
to increase the brightness.
Switch: User can set a switch to turn on or turn off the
backlight, PS1, PS2, PS3, PS4, PS5, Steering, Trigger can be
select as the switch. Turn off the backlight when you have
finished the parameters setting can save battery power.
Attention: to avoid the switch is invalid, before
select the brightness control switch, please into the
Channel setting menu (belong to Basic menu) to check if the switch has set for other function
already, make sure that set an idle switch to trigger the backlight on or off.
Brightness (Decrease): If the time that the touch panel has not operated reached the
decreased time you have set, the backlight will turn to the brightness corresponding to the value
set here. The original value is 50%, 0% to 100% can be set, click “-“ can decrease the brightness,
and click “+” can increase the brightness.
Decrease time: The backlight decrease time function is default inoperative. Users can set a
period to decrease the LCD backlight.
The decrease time counts the period that the touch panel has been not operated.
When the time that the transmitter stops operating reaches the decrease time you have set,
the brightness will automatically dim according to the brightness ratio set in the above
Brightness (Decrease).
To Next Page
Loading...
Need help?
General
