RadioLink RC8X User Manual

RadioLink Electronic Limited
www.radiolink.com
29
2
Make the receiver antenna and transmitter antenna parallel, keep transmitter apart from
receiver about 60 centimeters and both antennas straight, the RSSI is 0 to -30dBm is normal, the
signal is better the RSSI data is closer to 0.
3
Abnormal signal strength solution
Check whether the antennas of the receiver and transmitter are damaged. Most signal
strength degradation is caused by antenna damage. If it is damaged, the antenna needs to be
replaced. If there is no damage, you can test the transmitter and receiver for malfunctions by
replacing the receiver. If still cannot solve the problem, email to after_service@radiolink.com.cn
to get support.
2. RC8X Basic Functions
2.1 System menu setting
In System menu, users can set date and time, desktop, system theme, backlight, sound,
battery, vibration, LED brightness, home button, external input output, and calibration for wheel,
trigger, and rotary knob.

RadioLink RC8X Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Telemetry	Yes
Spreading Spectrum	DSSS
Antenna Type	Dual Antenna
Output Signal	PWM, PPM, SBUS
Low Voltage Alert	Yes
Simulator	Yes
Battery Type	LiPo
Voice Alerts	Yes
Display	3.5 inch color screen, 320*480 resolution
Frequency Band	2.4GHz
Operating Voltage	3.5-4.2V
Channel Resolution	4096
Model Type	Helicopter, Airplane, Glider, Multirotor
Compatible Receivers	R8EF, R6FG, R4FGM, R4F
Battery	3.7V 3000mAh LiPo