RadioLink Electronic Limited
www.radiolink.com
“NULL” indicates without any sound if the transmitter battery voltage is lower than the
alarm voltage you have set.
“ Sound” indicates the transmitter will broadcast with voice or other 20 types of sound
effects if the transmitter battery voltage is lower than the alarm voltage you have set.
Interval: The interval period for alarm is default 10 seconds. If the transmitter battery voltage
is lower than the alarm voltage you have set, the transmitter will alarm once every 10 seconds.
The interval period can be adjusted from 10 seconds to 3600 seconds.
Auto OFF: “ON” indicates the transmitter will turn off automatically when the transmitter
battery voltage is lower than the turn off voltage you have set.
Voltage: If the transmitter battery voltage is reached to the voltage you have set here, and
the Auto OFF button is ON, the transmitter will turn off automatically. The auto off voltage is
default 6.6V. It can be adjusted from 5V to 17V.
Attention: Please set the auto-off voltage according to your battery.
The auto-off voltage set too high will lead to the battery is not being used effectively, while
too low will lead to your battery being over-discharged.
Setting steps: turn on your RC8X, click the button at the left bottom of RC8X into
System menu, or click the blue select box named Battery to set the transmitter voltage. Click
“-“ can decrease the value and click “+” can increase the value.
Reset: click Reset will make the value back to the default number.
Back: click the button or short press the power button to return to the previous menu.
To Next Page
Loading...
Need help?
General
