RADTEL RT-490 - Page 12

Radtel RT-490 User Manual Page 12 of 29
Menu #
Item
Options
Description
34
DTMFST
OFF
No DTMF prompt when key pressed
to transmit DTMF
DT-ST
Prompt for DTMF when transmit key pressed
ANI-ST
Auto prompt when transmitting DTMF
DT + ANI
DTMF prompt whether automatically
transmitting DTMF or pressing transmit key
35
AUTOLOCK
OFF
Turns off auto keypad lock
5s,10s,15s
Select time to turn on the auto keypad locking
36
SCAN ADD
SCAN ADD
Not changeable, SCAN ADD is on
37
TONE
1000Hz,
1450Hz,
1750Hz, 2100Hz
Select Tone from List. Tone can be
simultaneously sent by holding down [PTT]
and pressing [PF2].
38
PTT-LT
Millisecs:
0,100,200, 400,
600, 800,1000
Ms Delay time before auto DTMF
transmits
39
MENU EXIT
TIME
5,10…60s
Control seconds of time before MENU exits
40
VOX DELAY
0.5s…2.0s
Control the seconds of time for VOX to react
41
RP_STE
OFF, 1s,2s,3s
…10sec
Due to the delay of the repeater, noise
appears when receive instant signal. Adjust
to eliminate the tail. To ensure if the repeater
is working or not, set to OFF
42
RPT_RL
OFF, 1s,2s,3s
…10sec
Adjust the length of time the tail sound
appears. If not needed set to OFF
43
ANI Function
OFF or ON
Turns function OFF or ON
44
MDF-A
FREQ
In Multi Display Mode the ‘A’ band (Upper
line) displays the Option selected here: FREQ
for Frequency, CH for Channel Number and
NAME for Channel Name.
CH
NAME