RADTEL RT-490 - Page 13

Radtel RT-490 User Manual Page 13 of 29
Menu
#
Item
Options
Description
45
MDF-B
FREQ
In Multi Display Mode the ‘B’ band (Lower line)
displays the Option selected here: FREQ for
Frequency, CH for Channel Number and NAME
for Channel Name.
CH
NAME
46
TDR
OFF or ON
Dual watch (monitor A and B at same time).
47
TX-A/B
OFF
Dual standby mode, transmits to Channel or
Frequency from Active/Main band
A
Select which Band will be transmitted when PTT
is pressed while TDR (Dual Watch mode) is ON.
- Select “A” to Press PTT and Talk on “A” Band
- Select “B” to Press PTT and Talk on “B” Band
B
48
STE
OFF or ON
If ON then after releasing the PTT, radio sends
turn-off code to suppress instant noise of
receiver. If OFF no turn-off code is sent.
49
AL-MOD
ON SITE
Alarm sounds for On-site Emergency
SOUND
Send emergency voice
CODE
Send emergency code
50
GPS
OFF or ON
Turns GPS function either OFF or ON
51
BLUETOOTH
OFF or ON
BLUETOOTH function OFF or ON. When
activated ON, Android Smartphone can
Bluetooth SCAN to PAIR to “walkie-talkie”.
This is required for using Android programing
APP “Super Walkie-Talkie” to remotely
program the RT-490.
52
DISPLAY
RX TIME
OFF or ON
Turns DISPLAY TIME function either OFF or
ON
53
RESET
VFO
VFO: Clears the memory channels out
ALL
ALL: Resets the radio, memory and all
settings back to factory defaults.