- 46 -
Example of a PS 1000.R2 balance display with bargraph option on: 500 g heavy load placed on a
weighing pan means that 50% of max capacity has been used (half-filled bargraph bottom line).
It is possible to enable <BARGRAF> option for the following modes: PARTS COUNTING, DOSING,
PERCENT WEIGHING, WEIGHING, ANIMAL WEIGHING, STATISTICS, TOTALIZING, PEAK
HOLD.
11.2.9. Non-Standard Information
Function enables declaring non-standard information, which is to be displayed in the bottom line of
the display. You can insert any text consisting of 19 characters maximum.
If you want the declared non-standard information is to be visible, set parameter P2.1.2 to < NSTD.
INF. > option.
11.2.10. F Shortcut Keys
Function enables assigning quick access for weighing functions which are to be accessible by
pressing F1, F2, F3 or F4 keys. You can choose between the following options for <WEIGHING>
mode: <NONE / ENTER TARE / PRINT HEADER / PRINT FOOTER / VARIABLE 1 / VARIABLE 2>.
These options can be freely assigned to any of the F keys. For other modes there are more available
options (see further sections of this manual).
To Next Page
Loading...
