RADWAG C315 Series User Manual

RADWAG C315 Series Specifications

General

Brand	RADWAG
Model	C315 Series
Category	Scales
Language	English

Summary

Intended Use of Medical Scales

Precautions for Scale Operation

Scale Operation Guidelines

Instructions for proper scale operation and initial use.

Battery Power Supply Details

Details regarding the type and capacity of batteries used in the scales.

Worn Out Batteries Replacement

Warranty Conditions and Exclusions

Warranty Coverage Limitations

Lists damages and conditions not covered by the product warranty.

Conditions Voiding Warranty

Details circumstances under which the product warranty becomes void.

Unpacking and Installation Guide

Personal Scales Installation

Step-by-step guide for unpacking and installing personal scale models.

Chair Scales Unpacking and Assembly

Bed Scales (C315.4B Series) Assembly

Scale Maintenance Procedures

Personal Scales Cleaning

Specific cleaning instructions for personal scale models.

Chair Scales Cleaning

Cleaning instructions for chair scales, emphasizing careful handling.

Bed Scales Cleaning

Guidelines for cleaning bed scales, including measuring stands.

Baby Scales Cleaning and Sterilization

Instructions for cleaning and sterilizing baby scales.

Mechanical Design Overview

Personal Scales Mechanical Design

Description of different configurations for personal scale models.

Chair Scales Mechanical Design

Bed Scales Mechanical Design

Baby Scales Mechanical Design

Scale Connectors Arrangement

Scale Connector Pin Assignments

Scale Operation Panel Overview

Scale Control Keys Functionality

Scale Start-Up and Operation

Scale Levelling Procedure

Procedure for correctly levelling the scale for accurate measurements.

Connecting Scale to Mains Power

Instructions for connecting the scale to the power supply.

Scale Battery Status Indicators

Battery Charge Status Check

Scale Program Menu Structure

Function Groups in Program Menu

Lists and describes the different function groups within the scale's program menu.

Navigating the Scale Menu

Returning to Weighing Screen

Performing Weighing Operations

Scale Zeroing Procedure

Procedure for zeroing the scale before starting a weighing operation.

Scale Taring Procedure

How to tare the scale, including variations for different scale types.

Manual Tare Entry

Dual Range Scale Devices

Setting Scale Measurement Units

Setting the Start Unit

Setting the initial unit displayed after the device start-up.

Setting a Temporary Unit

Setting a temporary unit for the current weighing session.

Scale Parameters Configuration

Adjusting Filter Level

Adjusting the filter level for stable and accurate readings.

Setting Value Release Rate

Setting the rate of stabilization for the measurement result.

Ambient Conditions Parameter

Autozero Function Settings

Tare Function Setup

Tare Value Entry Modes

Scale Tare Value Memory Management

Entering Tare Values to Memory

Procedure for entering and saving tare values into the scale's memory.

Selecting Tare Values from Memory

How to select and use previously stored tare values from memory.

Last Digit Display Setting

Scale Communication Interfaces

RS232 Port Configuration

Settings for the RS232 communication port, including baud rate and parity.

Wi-Fi Module Configuration

Configuration and parameters for the Wi-Fi module, including network status.

Peripheral Devices Connection

Computer Connection and Settings

How to connect and configure the scale with a computer.

Computer Port Configuration

Continuous Data Transmission

Printout Interval for Continuous Transmission

Printer Port Selection

Printer Port Settings

Selecting the appropriate port for printer connection and data transfer.

Additional Display Setup

Additional Display Port Configuration

Selecting the port for connecting an additional display device.

Printout Template Configuration

Miscellaneous Scale Parameters

Automatic Backlight Switch-Off

Setting the time interval for the automatic backlight turn-off.

Display Brightness Adjustment

Audible Beep Sound Settings

Automatic Scale Shutdown Setting

Setting Date and Time

Restoring Default User Settings

Accessing Scale Data

Working Modes - General Information

How to Activate a Working Mode

Step-by-step guide on how to select and run a working mode.

Working Mode Local Settings

Working Mode Accessibility

Enabling or disabling access to specific working modes on the scale.

Save Mode Configuration

Setting the mode for saving measurement data to a peripheral device.

Automatic Printout Interval Setting

LO Threshold Configuration

Working Mode: Standard Weighing

Weighing Mode Local Settings

Working Mode: Weighing with Peak Hold

Peak Hold Mode Local Settings

Local settings specific to the Weighing with Peak Hold mode.

Peak Hold Operation Options

Selecting methods for recording temporary weighing results in Peak Hold mode.

Hold Operation in Peak Hold Mode

Working Mode: BMI Determination

BMI Determination Local Settings

Local settings for the BMI Determination working mode.

BMI Determination Procedure

Procedure for performing BMI calculations using the scale.

Data Import and Export Functions

Weighing Records Export to USB

Exporting weighing records to a USB flash drive.

ALIBI Weighings Export to USB

Exporting ALIBI weighings data to a USB flash drive.

Scale Parameters Export and Import

Exporting or importing scale parameters via USB flash drive.

Connection Cable Diagrams

Technical Specifications Overview

Personal Scales Technical Specifications

Detailed technical specifications for personal scale models.

Baby Scales Technical Specifications

Chair Scales Technical Specifications

Bed Scales Technical Specifications

Scale Troubleshooting Guide

Scale Error Messages Explained

Scale Service and Repair

Scale Recycling and Disposal

Information Regarding EMC

Annex A: Supplementary Information

Data Plate Pictograms Explanation

Explanation of the symbols and pictograms found on the scale's data plate.

CE Mark and Directives

Information regarding the CE mark and its associated directives.