24.3. Chair Scales
Technical Specifications:
Communication interface *
100 240 VAC 50/60 Hz + battery
Operating temperature range
10 ÷ 85 % RH, non-condensing conditions
*) - conditioned by the scale type.
24.4. Bed Scales
Technical Specifications:
Communication interface *
100 240 VAC 50/60 Hz + battery
Operating temperature range
10 ÷ 85 % RH, non-condensing conditions
*) - conditioned by the scale type.
25. TROUBLESHOOTING
Power supply disconnected.
Connect the power supply to the scale.
Connect the power supply to the mains,
charge the battery.
No battery (not installed or
installed incorrectly).
Check if the battery is installed correctly
(polarization).
The scale switches
off automatically.
<7.4.t1> parameter set to
value enforcing scale shut-
down after particular time
interval.
Go to <P7.Othr> menu, set <7.4.t1>
parameter to 'nonE' value.
During the start-up,
message 'LH' is
displayed.
Weighing pan loaded during
the start-up.
Unload the weighing pan. Zero indication
is displayed.