11.5.1. Start Unit
Parameter for setting a unit that is to be displayed and used after the device
start-up.
Procedure:
Enter <P9.Unit / 9.1.UnSt> submenu.
Press key, available units are displayed successively one by one.
Options in case when the main unit is [kg]: kg (kilogram), g (gram),
lb (pound)*, N (Newton).
*) – unit disabled for verified scales.
Options in case when the main unit is [g]: g (gram), kg (kilogram), ct (carat),
lb (pound)*.
*) – unit disabled for verified scales.
Select a start unit and press key, next go back to the home screen,
to do it press key.
Upon restart the scale runs with the set start unit.
11.5.2. Temporary Unit
The temporary unit runs from the moment it is set to the scale shut-down and
restart.
Procedure:
Enter <P9.Unit / 9.2.Unin> submenu.
Press key, available units are displayed successively one by one.
Options in case when the main unit is [kg]: kg (kilogram), g (gram),
lb (pound)*, N (Newton).
*) – unit disabled for verified scales.
Options in case when the main unit is [g]: g (gram), kg (kilogram), ct (carat),
lb (pound)*.
*) – unit disabled for verified scales.
To Next Page
Loading...
