RADWAG C315 Series User Manual

38
 Wait for a stable weighing result, it takes about 2s, first patient's mass is
displayed, next pulsating value of height given in meter is shown.
 Use the keypad to enter the weighed person height, - press to select
digit, - press to set digit value.
 Press key to confirm, BMI value is displayed.
 In order to print BMI determination report on a scale-connected printer,
press key.
Report example:
Date 2019.07.23
Time 15:38:38
Scale ID 123456
Net 75.82kg
Height 1.85m
BMI 22.2
The printout template is freely configured by the user.
To configure the printout go to <P6.2.GLP> submenu (read
section 15 of this manual).
 Empty the weighing pan.
 Press key, the home screen of the <bnni> working mode is
displayed.
 Prior to the next measurement it is necessary to zero the scale, to do it
press key.
The BMI index is calculated using the following formula:
2
H
W
BMI 
where:
W - body mass in [kg].
H - height in [m].
BMI - index value rounded to the first decimal place.

RADWAG C315 Series Specifications

General

Brand	RADWAG
Model	C315 Series
Category	Scales
Language	English