RADWAG AS PLUS Series User Manual

- 84 -
Printout format for unverified balances (no digit marked):
1
2
3
4 - 12
13
14 - 16
17
18
stability
marker
space
character
mass
space
unit
CR
LF
Stability marker
[space] if stable
[?] if unstable
[^] if high limit is out of range
[v] if low limit is out of range
Character
[space] for positive values
[-] for negative values
Mass
9 characters - right justification
Unit
3 characters - left justification
Example:
_ _ _ _ _ _ 1 8 3 2 . 0 _ g _ _ CR LF - a printout generated, for <GLP printout template> settings as
given in the above table, from a weighing device upon pressing
key:
Printout format for verified balances with one digit marked:
1
2
3
4 - 14
15
16 - 18
19
20
stability
marker
space
character
mass
space
unit
CR
LF
Stability marker [space] if stable
[?] if unstable
[^] if high limit is out of range
[v] if low limit is out of range
Character
[space] for positive values
[-] for negative values
Mass
11 characters - right justification (digit markers contained)
Unit
3 characters - left justification
Example:
_ _ _ _ _ _ 1 8 . 3 2 [ 0 ] _ g _ _ CR LF - a printout generated, for <GLP printout template> settings
as given in the above table, from a weighing device upon pressing
key.
Printout format for verified balances with two digits marked:
1
2
3
4 - 14
15
16 - 18
19
20
stability
marker
space
character
mass
space
unit
CR
LF

RADWAG AS PLUS Series Specifications

General

Display	LCD with backlight
Power Supply	100-240 V AC 50/60 Hz
Calibration	Internal / External
Interface	RS232, USB-A, USB-B
Operating Temperature	+10° - +40°C
Pan Size	ø 85 mm
Repeatability	0.1 mg
Linearity	±0.2 mg
Stabilization time	2-3 seconds