RADWAG AS PLUS Series

- 28 -
Exemplary reports:
Header
GLP printout
Footer
8.3. NON-STANDARD PRINTOUTS
The balance software enables entering 4 non-standard printouts. Each of them can consist of
approximately 160 characters.
Non-standard printout may include:
• variables dependent on the working mode and other needs (mass, date etc.)
• permanent text from the user menu, remember to use capital letters exclusively, no Polish
signs allowed
• Non-standard printout can consist of 160-character long string.
8.3.1. Inserting Text
List of variables mutual for all working modes, having the same values:
%%
Printout of a “%” character
%V
Current net mass in the current unit
%N
Current net mass in the basic unit
%G
Current gross mass in the basic unit
%T
Current tare mass in the basic unit
%D
Current date
%M
Current time
%I
Balance number
%R
Program number
%P
Project number
%U
User number
%F
Name of a current function – working mode
%C
Date and time of the last adjustment
%K
Type of the last adjustment
%S
Currently weighed product
%Y
Deviation for the last adjustment
%1
Variable 1