- 7 -
1.2. CONNECTORS
COM 2 connector (additional display or external buttons)
COM 1 connector (printer)
1.3. CONNECTION CABLES - DIAGRAMS
Scale – computer cable (RS232)
Scale – printer cable (CITIZEN, EPSON)
1.4. PS R2.H SERIES
The PS R2.H series redefines the level of standard for precision balances. Not only do they share all
the features of R series balances, but can also work in adverse operating conditions (condensed
dust, drops of water falling down at different angles) typical for IP 54.
The PS R2.H balances are equipped with weighing pans: round ø115mm or square 195x195mm.
Balances with pans of a smaller size feature draft shield as well.
Additional asset of the PS R2.H balances are their interfaces build-in a hermetic closed housing
which is separated from the balance. The interfaces include 2×RS 232, USB type A, USB type B, and
Wi-Fi optionally.
Balance housing is made of plastic, whereas its pan of stainless steel.
The PS R2.H series metrological parameters are identical like those of standard design balances.
To Next Page
Loading...
Need help?
General
