- 29 -
Printout variables list:
Option enables printing out the name of a working mode.
Option enables printing out the balance type.
Option enables printing out the balance ID number.
Option enables printing out the name of a logged-in user.
Option enables printing out the name of a currently selected
Option enables printing out the date of the carried out
Option enables printing out the time of the carried out
Option enables printing out the value of VARIABLE 1.
Option enables printing out the value of VARIABLE 2.
Option enables printing out net weight value in a basic unit
(calibration unit).
Option enables printing out the tare value in the current unit.
Option enables printing out the gross mass value in the
current unit.
Option enables printing out the current measurement result
(NET weight) in a current unit.
Option enables printing out a report from the last adjustment,
according to the settings d
eclared for the adjustment report
printout (see sec. 14.1 of this user manual).
Option enables printing out separating dashes.
Option enables printing out an empty separating line.
Option enables providing an area for the signature of a user
performing the adjustment.
Option enables printing out one of 100 non-standard printouts
on the footer printout. The way of entering non-standard
printouts is described further down this user manual.
For the parameters described above, one of these values must be selected:
NO - do not print
YES - print
Exemplary reports:
To Next Page
Loading...
Need help?
General
