1.  INTENDED USE 
 
The scales are a response to growing market demands for a solution offering 
simplicity  of  operation  and  weighing  process  automated  to  the  maximum.  
C32 series scales enable fast and accurate mass measurement in laboratory 
and industry.  
 
Scale of standard design is equipped with two RS232 interfaces, USB type A, 
USB  type  B,  Ethernet,  wireless  communication,  2  proximity  sensors,  4  I/O. 
Optionally the device can be equipped with an internal battery, this allows its 
operation in places where there is no access to the mains. C32 series scales 
team  with  receipt  printers,  barcode  scanners,  additional  display,  and  PC 
accessories (mouse, keyboard, USB flash drive). 
 
 
2.  WARRANTY CONDITIONS 
 
A.  RADWAG feels obliged to repair or exchange all elements that appear to 
be faulty by production or by construction.  
B.  Defining defects of unclear origin and means of their elimination can only 
be  realized  with  the  assistance  of  the  manufacturer  and  the  user 
representatives. 
C.  RADWAG  does  not  bear  any  responsibility  for  damage  or  losses 
resulting  from  unauthorized  or  inadequate  performing  of  production  or 
service processes. 
D.  The warranty does not cover: 
  mechanical  damage  caused  by  product  exploitation  other  than 
intended, damage of thermal and chemical origin, damage caused by 
lightning, overvoltage in the power network or other random event, 
  inappropriate cleaning habits. 
E.  Loss of warranty takes place if: 
  a repair is carried out outside RADWAG authorized service point, 
  service claims intrusion into mechanical or electronic construction by 
unauthorized people, 
  the scale does not bear security seal stickers. 
F.  Warranty  conditions  outline  the  warranty  period  for  rechargeable 
batteries attached to the device for 12 months. 
G.  For detailed warranty conditions read the warranty certificate. 
H.  Contact with the central authorized service: +48 (48) 386 63 30. 
 
 
3. MAINTENANCE ACTIVITIES 
 
In order to ensure safety in the course of cleaning, it is necessary to disconnect 
the device from the mains. With this condition met, uninstall the weighing pan 
and other detachable components.