RADWAG PS 1200.R2

- 102 -
• Confirm the inserted mass by pressing button,
• The balance software proceeds to the mode <CHECKWEIGHING>
and states the values of declared thresholds in the bottom line (if such
an option for the function <INFORMATION> has been selected).
• At the top of the display the message <Min> is shown, which indicates the
value of the mass on the weighing pan is below the low threshold mass
value.
<Min>: mass lower than the value
of the low threshold
<Ok>: mass contained within
thresholds
<Max>: mass higher than the value
of the high threshold