17.7. Density of solids
Density of solids is a function that allows the determination of the density of the
material determined for the reference mass sample.
Using this function entails the additional kit for determining density of solids and
liquids (optional equipment).
In order to assemble the density kit on the balance, remove the weighing pan and
anti-draft shield from the balance. In the place of the weighing pan assemble the
weighing pan with stand (1) and place beaker’s basis (2) on it.
The kit suitable for the PS balances with weighing pan 128x128 mm.
Components of the density kit:
determining density of solids,
which density is lower than density
To Next Page
Loading...
Need help?
General