18.5. Animal weighing
The working mode applies a selection of filters which are designed to correctly determine
mass of an object (animal) moving on balance’s weighing pan.
Mode activating
Fig. 48. Animal weighing – display content
Internal mode settings:
- FILTER (determines the speed (weighing time) required for stabilization of the
final measurement result, the faster the filter setting, the shorter the measurement
time.
- THRESHOLD (its value is expressed in balance reading units, it is the value
below which the weighing results must come down to automatically enable the
following measurement of weighed object)
- AUTO START (the function used for automatic startup of the following
measurement processes)
- STATISTICS (calculation of statistics for each weighed object)
- RUN (Start measuring process)
To Next Page
Loading...
