Selecting other product from the database of thresholds (limits)
− While in checkweighing mode press SETUP key
− A message box is opened on the display. Go to the database of thresholds (limits)
and select another record from the database or set other HI and LO thresholds
values if the database is disabled.
18.3. Filling
Filling (dosing) mode is intended for precise measuring or adding a product until reaching a
pre-defined target value. Before the beginning of a measuring cycle the user should set a
target mass, which is simultaneous the HI dosing threshold.
Mode activating
Fig. 42. Filling – mode activating
To Next Page
Loading...
