RADWAG PS/X series User Manual

- 76 -
− After each measurement result the printer should print 3 labels
Principles for designing a printout:
− Insert into text strings data to be included in a printout – group of parameters P6
Printouts; parameters: Text 01 ÷ Text 80.
When designing a printout template use variables for controlling label printout (table 1)
and variables for sending specific data from a balance.
TABLE 1
\02L
\c
Beginning of a label
r
label name\c
Give name of alabel
X\c
Srart of variables editing
\02U01NN\c
Variable no. 1; NN – variable symbol
\02U02NN\c
Variable no. 2; NN – variable symbol
\02U03NN\c
Variable no. 3; NN – variable symbol
\02UnnNN\c
Variable no. nn. NN – variable symbol
\02fnnn\c
Paper offset by nnn value in [mm] – depending on label
size
E\c
End of variables of editing
\02Ennnn\c
Print nnnn quantity of labels
\02G
\c
End of a label
− An instance of a printout template for a label (following parameters from table no.
1)
Fig. 64. Label template saved in a factory menu
− On adding data on a non-standard printout set other printout parameters, such
as:
Printout no. – 1
Printout no. 1 start – 1
Printout no. 1 stop – 10

RADWAG PS/X series Specifications

General

Brand	RADWAG
Model	PS/X series
Category	Scales
Language	English