Function GIVE ENABLED WORKING MODE
Command PM CR LF
Function SEND SETUP
Command PS CR LF (causes sending complete data on balance setup – printout of
parameters)
Function “BEEP” SOUND
Command B CR LF (causes immediate activating of beep sound in a balance)
Function GIVE LAST CODE ERROR
Command ER CR LF (causes sending code of last saved error in a balance)
Function SEND TEXT STRING
Command DS CR LF (causes previewing a sequence of characters)
Function ERASE TEXT STRING
Command CS CR LF (causes erasing a text string and restoring default display status)
Function SHOW HEADER
Command DH CR LF (causes previewing a sequence of characters in the upper bar of
the display)
Function ERASE HEADER
Command CH CR LF (causes erasing a text string from the upper bar of the display)
Function SHOW FOOTER
Command DF CR LF (causes previewing a sequence of characters in the bottom bar
of the display)
Function ERASE FOOTER
Command CF CR LF (causes erasing a text string from the bottom bar of the display)
Function CARRY OUT INTERNAL ADJUSTMENT PROCESS
Command CL CR LF
Function LOCK KEYBOARD
Command KL CR LF
Function UNLOCK KEYBOARD
Command KU CR LF
Function SWITCH OFF KEYBOARD “ECHO“
Command E0 CR LF (disables sending codes of pressed keys and buttons)
Function SWITCH ON KEYBOARD ”ECHO“
Command E1 CR LF
Function SWITCH OFF THE BALANCE
Command O0 CR LF (equal to pressing ON/OFF button)
To Next Page
Loading...
Need help?
General