- 94 -
A_E CR LF
– error in-course of command
execution, no parameter or incorrect
format
A_I CR LF
– command understood but not
accessible at this moment
n – parameter, decimal value determining autozero settings
n → 0 – autozero off
1 – autozero on
CAUTION!
Command changes settings for a current working mode.
Command:
LF
– turn autozero
function on
Response:
CR LF
– autozero function is
on
AUTOZERO function operates until it is turned off by A 0 command.
Set ambient conditions state
EV_E CR LF
– error in-course of command
execution, no parameter or incorrect
format
EV_I CR LF
– command understood but not
accessible at this moment
n – parameter, decimal value determining ambient conditions state
n → 0 – unstable ambient conditions
1 – stable ambient conditions
CAUTION!
Command changes settings for a current working mode.
Command:
LF
– set value ‘stable’
for ambient
conditions option
Response:
_OK CR LF
– ambient conditions
option set to value
‘stable’
<AMBIENT CONDITIONS> parameter is set to value <STABLE> until command EV 0 swaps it to
value <UNSTABLE>.
EVG – Give currently set ambient conditions
On receipt of a command, the terminal sends information on currently set ambient conditions.
- command carried out, returns set ambient conditions
- command understood but not accessible at this moment
- parameter, ambient conditions symbols
Example:
Command:
- give currently set ambient conditions
Response:
- currently set ambient conditions unstable