- 25 -
7d1SoP - 7 data bits; 1 stop bit, ODD parity
8d1SnP - 8 data bits; 1 stop bits, no parity
8d2SnP - 8 data bits; 2 stop bits, no parity
8d1SEP - 8 data bits; 1 stop bit, EVEN parity
8d1SoP - 8 data bits; 1 stop bit, ODD parity
• Return to the weighing mode saving introduced modifications.
16. MISCELLANEOUS
You can set the following parameters: backlight, 'beep' signal, automatic
shutdown. The parameters are to be found in <P5.Misc> submenu.
16.1. Backlight
The balance automatically selects type of backlight on recognising power
supply type (mains, batteries):
• bL – mains
• blbA – battery
16.1.1. Backlight for Power Supply From Mains
Procedure:
• Enter <P5.Misc> submenu.
To Next Page
Loading...
