Radwin Transportation FiberinMotion - Figure 2-10 Thin Pole: Tighten; Figure 2-7 Thin Pole: Fasten; Figure 2-8 Thin Pole: D Onot; Figure 2-9 Thin Pole: Rotate

FinMInstallationGuide Release4.5.25 2‐7
TBSMounting SiteInstallation
Thinpole(diameter3/4to11/2):Positionthepoleclampasshowninthefo llowin gtwofigures,donotcompletelytightenthebolts:
2. PlacethisassemblyonthepolewhereyouwanttomounttheTBS.Onceitisinplace,
rotatethepoleclampasshown,thentightenbothbolts.
Figure2‐7:Thinpole:Fastenclamptobase
plate
Figure2‐8:Thinpole:Donotcompletely
tightenbolts
Figure2‐9:Thinpole:Rotateclamp Figure2‐10:Thinpole:tightenbolts