Radwin Transportation FiberinMotion - Figure 2-26 Medium Pole: R; Figure 2-28 Using Metal Bands; TBS Mounting on a Wall

FinMInstallationGuide Release4.5.25 2‐13
TBSMounting SiteInstallation
2. PlacethisassemblyonthepolewhereyouwanttomounttheTBS.Onceitisinplace,
rotatethepoleclampasshown,thentightenbothbolts.
HoriztonalPole‐thick
1. Diameterlargerthan3:Usemetalbands(notsupplied),threadedthroughtheholesas
showninFigure 2‐28,orU‐bolts(notsupplied),fastenedusingtheholesasshownin
Figure 2‐29:
TBSmountingonawall
1. Fastenthestandoffstothebaseplateintheholeslabeled“V”or“H”,whicheverismore
convenient,asshown:
Figure2‐26:Mediumpole:Rotateclamp Figure2‐27:Mediumpole:tightenbolts
Figure2‐28:UsingmetalbandsforalargepoleFigure2‐29:UsingU‐boltsforalargepole