Radwin Transportation FiberinMotion - Figure 2-76 Adjust Distance; Figure 2-77 Inserting Cage

FinMInstallationGuide Release4.5.25 2‐40
TMUMounting SiteInstallation
7. Placethesecondslidenexttothefirstandadjustitsrearmountingflangesothat
thedistancebetweentheflangesarethesameasthatofthefirstslide.
Figure2‐76:Adjustdistanceofmountingflangeonsecondslide
8. Insert8mechanicalcagenutsintheappropriateholesinthe19inrack:4oneach
sideoftherack.

Figure2‐77:Insertingcagenuts(onesideshown)