Rae MultiRAE Plus User Manual

The Hazardous Environment Detection Company
MultiRAE Plus Start-up: Turning On
• Unplug MultiRAE Plus from charger
• Hold “MODE” Key to turn on
• Alarm will beep once
• Watch display screen for messages such
as:
– Sensors installed & their warranty expiration
– Alarm limits
– Last calibration date
– User/Alarm/Datalog modes
• Warm-up will take approximately 90
seconds

Rae MultiRAE Plus Specifications

General

Brand	Rae
Model	MultiRAE Plus
Category	Measuring Instruments
Language	English