Rae QRAE 3 User Manual

9
3.2. Screen Display For Various Numbers Of Active Sensors
The QRAE 3 family of instruments can accommodate from one to four sensors. In order to
maximize readability and the amount of information shown, the display is automatically
reconfigured, according to the number and types of sensors in the QRAE 3.
One sensor.
Two sensors.
Three sensors.
Four sensors.
3.3. Menus
The reading menus are easy to step through by pressing the [MODE] and [Y/+] key.
4. Wireless Control And Submenus
When you step through the main menu, as shown in the previous diagram, there are four
screens for wireless communication, containing information on wireless settings and
status.
Note: These are only present if the QRAE 3 is equipped with a wireless module.

Rae QRAE 3 Specifications

General

Brand	Rae
Model	QRAE 3
Category	Monitor
Language	English