To Next Page

To Previous Page

8.3.6.6. Interval

This menu allows you to change the interval between wireless transmissions. The interval can be

set to 10, 30, 60, 120, or 240 seconds.

Note: The default interval is 30 seconds.

8.3.6.7. Off Network Alarm

If you would like the QRAE 3 to notify you when it loses connection with a network, turn this on.

1. Choose between “On” and “Off” by pressing [MODE].

2. Select the highlighted state by pressing [Y/+].

3. Press [MODE] until Exit is selected, to register the change.

Note: When wireless network connection is lost, the QRAE 3 alarms once per second.

8.3.6.8. Factory Reset

Restore all the wireless settings to their original factory defaults.

Caution! Once you reset the wireless settings, you cannot retrieve any of the settings deleted by

performing this reset.

Reset Wireless

Settings?

 Press [Y/+] to reset the wireless settings.

 Press [MODE] to exit without resetting the wireless settings.

Other manuals for Rae QRAE 3

Questions and Answers:

Need help?

Do you have a question about the Rae QRAE 3 and is the answer not in the manual?

General