Advanced Options
For Basic Setup, see the Quick Reference Guide located
inside the controller door.
Seasonal Adjust
Increase or decrease watering duration based
on seasonal weather conditions.
1.
Turn the dial to
Seasonal Adjust %.
2.
Press or to increase or
decrease the Seasonal Adjust
percentage setting. (5 - 200%)
Delay Watering
Delay watering if irrigation is not needed.
1.
Turn the dial to Delay
Watering.
2.
Press or to set the
DAYS REMAINING. The next
watering days remaining
will update on the display to
indicate when watering will
resume.
PROGRAM
SELECT
A B C D
3.
If adjustment will not be applied to all programs, press
the Program Select button to select the desired
program.
b
NOTE: Displayed run times are inclusive of any
seasonal adjustment made. Example: Station 1 has
a run time set for 10 minutes. The program Seasonal
Adjusted value is now set to 150%. The new actual
run time is 10 minutes x 150 % = 15 minutes.
Rain Sensor
Set the controller to obey or ignore a rain
sensor.
@
SPECIAL FEATURE AVAILABLE
The Rain Sensor setting applies to all programs and is
not program specific. However, you can set any station to
Bypass (Ignore) the sensor. For more details see the Special
Features card or the Advanced User Manual.
1.
Turn the dial to Rain Sensor.
2.
Press or to select
ACTIVE or BYPASS.
b
NOTE: Running a Manual Station or Program will use
the Seasonal Adjusted value.
3
ESP-Me User Manual
Advanced Options
AB
WE
NEXT
3
DAYS REMAINING
BYPASS