Need help?Do you have a question about the Rain Bird HP 6 and is the answer not in the manual?
General| Stations | 6 |
|---|---|
| Start Times per Program | 4 |
| Cycle and Soak | Yes |
| Display | LCD |
| Battery Backup | Yes (Lithium coin-cell battery) |
Details key features of the HP Series controller, including its LCD display and user interface elements.
Setting the current time and selecting the day cycle using controller buttons and DIP switches.
Configuring watering days for programs A/B and defining multiple start times for watering.
Assigning stations to programs, setting run times, and completing the setup process.
Operating the controller in 'OFF' mode and adjusting watering percentages using Water Budgeting.
How to manually start individual stations or entire watering cycles.
Explanation of the 'F' display indicating electrical faults like short circuits or overloads.
Guidelines for selecting an optimal location and physically mounting the controller.
Instructions for connecting the rechargeable battery and performing low-voltage wiring.
Steps for safely connecting the controller to the 117 VAC power source via a junction box.
Specific wiring guidance for international HP Series models operating on 50Hz power.
Information on electrical surge protection and potential damage from lightning storms.
Advice on optimizing watering schedules and water conservation methods.
To Next Page
