Need help?Do you have a question about the Rain Bird HP Series and is the answer not in the manual?
General| Enclosure | Indoor/Outdoor |
|---|---|
| Water Budget | Yes |
| Battery Backup | Yes |
| Enclosure Rating | NEMA 3R |
| Stations | 4 |
| Number of Stations | 4 |
| Cycle and Soak | Yes |
| Sensor Input | Yes |
Details the various features of the HP Series controllers, including LCD, switches, programming, cycles, and budgeting.
Instructions for setting the current time and selecting the day cycle (2, 3, 5, or 7-day) using controller buttons and DIP switches.
Procedure for setting watering days and start times for programs 'A' and 'B' based on selected day cycles.
Guide to assigning stations to programs 'A' or 'B' and setting individual station run times.
Steps to set the current day and switch the controller to AUTO mode to complete programming.
Instructions for using the 'OFF' mode for system shutdown and adjusting watering duration via water budgeting.
Guide to manually starting individual stations or entire programs, including cancellation procedures.
Guidance on selecting an appropriate location and mounting the controller securely to a wall.
Instructions for connecting a 9-volt NiCad rechargeable battery to the controller's battery clip.
Information regarding electrical surges from lightning storms and potential damage to the controller.
Provides advice on water conservation, including watering frequencies, cycle durations, and water budgeting.
To Next Page
