Rain Bird HP Series User Manual

“A” Program has a default start time of 8:00 a.m. and “B” has a 6:00 p.m. default.
These start times are backup start times that operate if your programming is ever
lost following a prolonged power outage that outlives your battery. You will be chang-
ing these defaults to the start times you wish.
Use the “Hr./Min.” button and the arrow buttons to set the hour and minute for the
start time as desired. Each program has eight (8) start times available. Touch “Start
Times" to access these extra start times and use the ‘‘Hr./Min.”’ and arrow buttons
to set them. By pressing "Start Times" repeatedly, you can display each of the eight
possible start times for the program you are setting. Four dashes in the upper portion
of the display means no start time has been set.
No Start Time, or Start Time Eliminated
Multiple start times are good for scheduling short watering cycles repeated several
times per day for such applications as propagating new lawns or establishing new
plant material.
TO ELIMINATE A START TIME press the ‘‘Start Times" button repeatedly as you
approach the unwanted start time and then press and hold "Start Times” for about 3
seconds at the time you are cancelling until it goes blank in the display.
10

Rain Bird HP Series Specifications

General

Brand	Rain Bird
Model	HP Series
Category	Controller
Language	English