Rain Bird Image Series Instruction Manual

123
123
123
123
1
2345 6 7
1
2345
1
23
1
2
1
23
1
2 3
4
5 6
7
PROGRAMMING
The IMAGE has a circular menu. Repeatedly pressing the key will display the 8 screens in the menu.
The programming data you enter is automatically stored when you move from one screen to the next by pressing
Icons symbolize the various functions and indicate wich part of the irrigation schedule you are programming. To call up a specific function, repeatedly
press the until the desired function icon appears in the display.
I - Set clock
A - Set current time of day
Use the +/On and -/Off keys.
The +/On key increases the setting. The -/Off key decreases the setting.
Holding down either key for over 2 seconds will cause the time setting to change rapidly.
B - Set current day for 5, 3, or 2 day cycles
If you have selected the 5, 3, or 2 day cycle, you can make the current day ("Today") any day number
you wish. Press the key to move the square cursor to the day number you select for "Today".
B - Set current day for 7 day cycle
Press key to move the square cursor through the days of the week numbered 1 to 7
(1 = Monday, 2 = Tuesday, etc,). Place the cursor on the current day of the week = today.
Example : Today is Wednesday. Place the cursor on "3"
Now snap the front panel on the cabinet
RAIN BIRD IMAGE SERIE SOLID STATE CONTROLLER
INSTRUCTION MANUAL
DAY CYCLE
= VARIABLE 7
DAY CYCLE
= VARIABLE 3
DAY CYCLE
= VARIABLE 5
DAY CYCLE
= VARIABLE 2
DAY CYCLE
L.C.D.
Example : if you have selected a 3 day cycle and you want tomorrow to be the first watering day place the cursor
on "2". See step II.

Rain Bird Image Series Specifications

General

Mounting	Indoor/Outdoor
Start Times per Program	4
Cycle + Soak	Yes
Display	LCD
Enclosure Rating	NEMA 3R
Backup Battery	Yes
Watering Days	Customizable