Need help?Do you have a question about the Rain Bird E-6C and is the answer not in the manual?
General| Zones | 6 |
|---|---|
| Backup Battery | No |
| Rain Sensor Input | Yes |
| Master Valve/Pump Output | Yes |
| Wireless Rain/Freeze Sensor Compatible | No |
| Start Times per Program | 4 |
| Mounting | Indoor |
Legend explaining the icons and their corresponding functions on the EC controller.
Lists the main features of the Rain Bird Ec irrigation controller, including programs, start times, and budgeting.
Explains the process of programming the controller, including start times, run times, and watering cycles.
Guidance on programming the controller using battery power and installing the backup battery.
Explains how the diagnostic circuit breaker detects and handles station electrical faults.
Details the Liquid Crystal Display (LCD) and the function of the +/-, PROGRAM, and ENTER buttons.
Describes the functions of the programming dial for selecting modes and programming steps.
Instructions on filling out the programming chart before setting up the controller's watering schedule.
Procedure to erase all previous programming from the controller's memory.
Steps to set the current year, month, and day on the controller.
Instructions for setting the current hour and minute, including AM/PM or 24-hour format.
How to choose from three pre-programmed watering schedules for convenience.
Guide to selecting and programming individual watering programs (A, B, or C).
Procedure to define the cycle of days for watering, such as 7-day or 1-to-6 day cycles.
How to select specific days within a 7-day or 1-to-6 day cycle for watering.
Steps to enter up to four start times for each watering program.
Procedure to remove unwanted start times from a program.
How to set the duration, in minutes, for each station's watering cycle.
How to temporarily suspend all watering programs by setting the controller to Off.
Details on how the controller operates automatically in Auto mode, displaying current status.
How to increase or decrease watering run times for all stations by a percentage.
Procedure to manually water specific stations for additional watering needs.
How to manually run one or more programs in sequence.
Procedure to test all stations sequentially to verify sprinkler operation.
Guidance on selecting a suitable and accessible location for mounting the controller.
Step-by-step instructions for physically mounting the controller unit to a wall.
Procedure for connecting the external transformer and main power to the controller.
How to connect the controller to the remote control valves using field wires.
Solutions for a blank or partially blank LCD display on the controller.
Diagnosing and resolving issues where stations operate but no water is delivered.
Resolving problems where watering programs do not start as scheduled.
Diagnosing why a particular station fails to operate according to the schedule.
Solutions for watering programs that start unexpectedly or at the wrong times.
Diagnosing and fixing issues where watering continues beyond the scheduled stop time.
Understanding and clearing 'Err' messages related to electrical problems or overloads.
To Next Page
