EasyManua.ls Logo

Rain Bird E-6C - Defining Specific Watering Days; Setting Watering Days for Cycles

Rain Bird E-6C
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15Ec Controller
7-day (Custom)  Waters on a weekly cycle; any day of
the week can be a watering day.
Ev  Waters only on even-numbered days.
Od  Waters only on odd-numbered days.
Od31  Waters only on odd-numbered days, except the
31st of any month and February 29th.
3. If you select a 7-day, or a 1- through 6-day watering cycle,
go to Set Watering Days.
NOTE: If you select Ev, Od, or Od31 as your
watering day cycle, you do not have to set watering
days. Go directly to Set Program Start Time(s) on
p. 16.
Set Watering Days
DIAGRAM 12
Use the procedures below to set watering days for a 7-day, or a
1- through 6-day watering cycle.
7-Day Watering Cycle
1. Turn the programming dial to WATER DAY.
2. If you selected a 7-day watering cycle, the seven weekdays
appear as a row of numbers and the number 1 in the day
cycle flashes.
3. The display shows the programs letter (A, B, or C).
4. A number appears, indicating the today number. The
days abbreviation also appears in the display.
5. Press + or - to turn a particular watering day ON or OFF.
An ON day has a box around it. An OFF day has no box
around it.
6. Press ENTER to move to the next day.
7. Repeat steps 5 through 7 for each day.
1- to 6-Day Watering Cycle
DIAGRAM 13
1. Turn the programming dial to WATER DAY.
2. If you selected a 1- to 6-day watering cycle, the row of days
in that cycle appears in the display with a box around day 1.
The only watering day in a 1- to 6-day cycle is day 1.
3. The display shows the programs letter (A, B, or C).
4. A flashing number appears in the display, indicating where
today is in the watering cycle.

Other manuals for Rain Bird E-6C

Related product manuals