RainPoint ITV201P Faqs

CONTENTS
1. Water Outlet
1.1 The water won't stop/flow out
1.2 Low water outflow
2. Water Leakage
2.1 Water leakage at the water inlet
2.2 Water leakage at the water outlet
3. LCD Display
3.1 There is steam or water mist in the display
3.2 The display is blank
4. Battery
4.1 Short battery life
5. Watering Plan/Schedule
5.1 The timer did not follow the watering plan/schedule
5.2 The timer can not set every day watering
1. Water Outlet
1.1. The water won't stop/flow out
1)For the first use, the valve can not close, please check the following first:
 Insert the brand new Alkaline battery and tighten the timer on the tap.
 With the faucet closed, turn the dial on the timer to ON.
 Press and hold the OK button for 3-5 seconds to manually open the inside valve of the timer.
 Press and hold the OK button for 3-5 seconds to manually open the inside valve of the timer,
and then press and hold for 3-5 seconds to close the valve.
 Repeat the step 3 for 3 to 5 times.
 Turn on the faucet, press and hold the OK button for 3-5 seconds, and manually open the
valve again.
 Manually open the valve again to check if everything is OK.
 Then press and hold the button for 3-5 seconds to turn it off manually.
 If the timer still cannot be turned off normally, please repeat the step 3-4 for 10 times
(If the above check is normal, please contact our customer service team for a help.)
For the first time use, the water won’t stop/flow out
Explanation:
The factory had done the water testing for every single valve when manufactured. After a period
time of shipping and storage, the water in the valves has been evaporated, and silicone
diaphragms inside the valves are stuck together, causing the valve to not be opened or closed
normally. Then the water won’t stop/flow out.

RainPoint ITV201P Specifications

General

Brand	RainPoint
Model	ITV201P
Category	Timer
Language	English