RainPoint ITV201P - START TIME

STEP 2: START TIME
1. Turn dial to START TIME.
2. Use the "+" or "-" button to set the sta time.
(If you choose 12H mode, please note AM and PM).
3. Use the "OK" button to conrm and switch between hours or minutes.
4. After conrming this plan, press the "P" button to switch watering
plans (P1, P2, P3).
(When switching to another plan, the settings from the previous plan
are automatically saved).
5. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
TIPS:
1. Press and hold the "+" or "-" button can increase or decrease the
time quickly.
2. If you want to turn o a ceain plan, please adjust the sta time to
"23 : xx" (24-hour mode) or "11 : xx" PM (12-hour mode) when setting
the plan. Then press the "+" button again, a ashing "OFF" will appear
on the screen. And press "OK" to conrm closing the plan. "OFF" on
the screen is always on, indicating that the plan has been turned o.
3. If you want to cancel the "OFF" plan, press the "+" or "-" button
again on the plan to set its sta time.
4. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
- 09 -
ENEN