RainPoint ITV201P User Manual

Low water
pressure
LCD
screen
does not
display
Dial or
button
problems
The timer
does not
water
1. Filter blockage
2. Inlet pressure not
sucient to
suppo
watering needs
1. The batte is
exhausted
2. The display is exposed
to direct sunlight
1. The dial/valve is stuck
2. Accidentally holding
the OK button while
inses the batteries
1. The dial turn to OFF
position
2. The faucet is not
turned on
3. The batte is dead, it
shuts down
automatically
4. Rain delay is ON
1. Check if the lter is
clogged, if so, clean
or replace the lter.
2. Make sure the timer is
installed properly and
not cross-threaded.
3. Installation of a booster
pump or other auxilia
equipment of increasing
pressure.
1. Replace new 2*AAA
alkaline batteries and
installed correctly.
2. Avoid direct sunlight,
and obsee if the
batte is too low.
1. Same procedure as
above.
2. Turn the dial to the OFF
to check if the valve
can be closed.
1. Rotate the dial to ON
position.
2. After nishing all
settings, turn on the
faucet.
3. Replace with new
alkaline batteries.
4. Waiting for the plan to
resume again.
If you need help in using the timer, please feel free to contact us.
US Free Hotline(English): +1 833-381-5659
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch): +44 800-808-5337
(MON-FRI 9:00 AM-5:00 PM CET )
Email: seice@rainpointus.com
WhatsApp: +1 626-780-5952
- 21 -
ENEN

RainPoint ITV201P Specifications

General

Brand	RainPoint
Model	ITV201P
Category	Timer
Language	English