RainPoint ITV201P - CLEANING YOUR TIMER

CLEANING YOUR TIMER
3. Turn on the Manual Watering Mode of the timer to open the valve and
check whether the water pipe of the timer is blocked. If it is blocked,
please clean it gently with a small cleaning brush.
After a period of use, impurities or di in the water may accumulate in
the timer. Therefore, the timer should be cleaned regularly to ensure its
proper operation.
Please follow these steps to clean the timer.
1. Turn o the garden faucet and remove the timer. Check whether the
lter at the timer water inlet has accumulated impurities.
2. If the lter is diy, please take it out of the timer and rinse it with
running water.
filter
- 22 -
EN