INSTALLING THE TIMER
1) Turn o the garden faucet.
2) Wrap Teon Tape around the faucet
threads.
3) Screw the timer to the garden faucet and
make the display as veical as possible
to the ground to prevent rainwater from
accumulating and leaking into the interior.
4) Wrap Teon Tape around the threads of
the timer outlet.
5) Screw the garden hose to the timer outlet.
6) Turn on the faucet after programming the
timer.
Tips: If the connection between the timer and the faucet or hose is
not tight or leaking, wrap more Teon Tape(thread seal tape) to make
them tight.
Note:
Please do not use tools, only install the timer by hand.
When expecting freezing temperatures, timers should be removed
from the hose faucet and stored indoors to avoid potential freeze
damage.
Please install the lter properly and keep it clean as follows.
- 05 -
ENEN
To Next Page
Loading...
Need help?
General
