EasyManua.ls Logo

RAM 3500 - Page 115

RAM 3500
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting The Time
Model 8.4AN synchronizes time automatically via GPS, so it should not require
any time adjustment. If you do need to set the time manually, follow the
instructions below for Model 8.4A.
For Model 8.4A, turn the unit on, then press the time display at the top of the
screen. Press “Yes.”
If the time is not displayed at the top of the screen, press the “Settings” button on
the touchscreen. In the Settings screen, press the “Clock” button on the
touchscreen, then check or uncheck this option.
Press “+” or “–” next to Set Time Hours and Set Time Minutes to adjust the time.
If these features are not available, uncheck the Sync Time box.
Press “X” to save your settings and exit out of the Clock Setting screen.
Background Themes
Screen background themes are selectable from a pre-loaded list of themes. If
you’d like to set a theme, follow the instructions below.
Press the “Settings” button on the touchscreen.
Press the “Display” button on the touchscreen.
Then press “Set Theme” button on the touchscreen and select a theme.
Audio Settings
Press of the “Audio” button on the touchscreen to activate the Audio settings
screen to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume.
You can return to the Radio screen by pressing the “X” located at the top right.
Balance/Fade
Press the “Balance/Fade” button on the touchscreen to Balance audio between
the front speakers or fade the audio between the rear and front speakers.
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons on the touchscreen or
press and drag the Speaker Icon to adjust the Balance/Fade.
Equalizer
Press the “Equalizer” button on the touchscreen to activate the Equalizer screen.
Press the “+” or “–” buttons on the touchscreen, or press and drag over the level
bar for each of the equalizer bands. The level value, which spans between plus or
minus 9, is displayed at the bottom of each of the Bands.
Speed Adjusted Volume
Press the “Speed Adjusted Volume” button on the touchscreen to activate the
Speed Adjusted Volume screen. The Speed Adjusted Volume is adjusted by
pressing the volume level indicator. This alters the automatic adjustment of the
audio volume with variation to vehicle speed.
ELECTRONICS
113

Table of Contents

Related product manuals