RAM 3500 - Uconnect 3.0

UCONNECT 3.0
Clock Setting
1. Push the Menu button at the bottom of the radio, and push the Enter/Browse
button for System Settings. Next, select the Time and Format setting and then
select Set Time by pushing the Enter/Browse button.
2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pushing the
Enter/Browse button to move to the next entry. You can also select 12hr or 24hr
format by turning the Tune/Scroll knob, then pushing the Enter/Browse button on
the desired selection.
3. Once the time is set press the “Back” button to exit the time screen.
Uconnect 3.0 Radio
1 — RADIO Button
2 — Phone Pick-Up Button
3 — Phone Hang-Up Button
4 — A-B-C Button
5 — BROWSE/ENTER Button —
TUNE/SCROLL Knob
6 — SEEK Up Button
7 — Play/Pause — Mute Button
8 — BACK Button
9 — MENU Button
10 — INFO Button
11 — SEEK Down Button
12 — ON/OFF Button — Volume
Knob
13 — Preset Buttons
14 — MEDIA Button
ELECTRONICS
93