CAUTION!
• To avoid vehicle damage, ParkView should only be used as a parking aid. The
ParkView camera is unable to view every obstacle or object in your drive path.
• To avoid vehicle damage, the vehicle must be driven slowly when using ParkView
to be able to stop in time when an obstacle is seen. It is recommended that the
driver look frequently over his/her shoulder when using ParkView.
NOTE:
If snow, ice, mud, or any foreign substance builds up on the Camera lens, clean the
lens, rinse with water, and dry with a soft cloth. Do not cover the lens.
Turning Rear View Camera image On:
1. Press the "Controls" button located on the bottom of the Uconnect display.
2. Press the "Backup Camera" button
to turn the Rear View Camera system
ON.
NOTE:
Once initiated by the "Backup Camera" button, the Rear View Camera image may be
deactivated by pressing the "X" button on the touchscreen. On deactivation, the
previous selected screen will appear.
POWER SLIDING REAR WINDOW
The switch for the power sliding rear window is located on the overhead console.
• Push the switch right to open the glass
and pull the switch left to close the
glass.
Power Sliding Rear Window Switch
OPERATING YOUR VEHICLE
70
To Next Page
Loading...
