5. Turn the ignition OFF.
• Block both the front and rear of the wheel diagonally opposite the jacking position.
For example, if the right front wheel is being changed, block the left rear wheel.
NOTE:
Passengers should not remain in the ve-
hicle when the vehicle is being jacked.
Instructions
1. Remove the spare wheel, jack, and
tools from storage.
2. Using the wheel wrench, loosen, but
do not remove, the wheel nuts by
turning them counterclockwise one
turn while the wheel is still on the
ground.
3. Placement of the jack:
Wheel Blocked
Warning Label
WHAT TO DO IN EMERGENCIES
229
To Next Page
Loading...
