RAMMER S 83 STD - Environmental Protection and Recycling Policy

To Next Page

To Previous Page

Product introductionS 83 STD

3.5 ENVIRONMENTAL PROTECTION AND RECYCLING POLICY

Rammer manufactures products which contribute to the recycling of materials to

help customers achieve their environmental objectives. During the manufacturing

all the necessary precautions are taken to make sure that no harm is done to the en-

vironment.

Rammer strives to foresee and minimize the risks that might be caused by operation

or maintenance of products, which could expose humans or the environment to dan-

ger. Rammer support customers in their efforts to consider the environmental pro-

tection in their everyday work.

When working with Rammer product please follow these guidelines:

■ Dispose of packaging materials properly. Wood and plastic can be burned or re-

cycled. Deliver the steel belts to metal recycling center.

■ Protect environment from oil spills.

In case of hydraulic oil leaks, the equipment should be serviced immediately.

Follow the product's greasing instructions and avoid excessive greasing.

Be careful when handling, storing and transporting oils.

Dispose of empty oil or grease containers appropriately.

Consult local authorities for detailed instructions.

■ All metal parts of the product can be recycled by delivering them to an author-

ized scrap metal collection facility.

■ Comply with local waste classification rules when disposing of used rubber or

plastic parts (buffers, wear plates, seals).

■ When scrapping the whole product or pressure accumulator, consult your local

Rammer dealer for instructions on depressurizing the accumulator.

■ Do not bring the product or accumulator to a scrap metal collection center be-

fore depressurizing the accumulator first.

Consult with your local dealer for more information.