© 2005 SANDVIK TAMROCK CORP.Page 28 - OPERATION
Operation S 83 STD
5.4 MOVEMENT
The transportation and parking positions are shown below. When moving with the
hammer, ensure that it isn't too close and doesn't point at the cabin window.
5.5 SPECIAL CONDITIONS OF USE
If hammer is to be used in conditions that differ from normal breaking or demolition
work conditions, such as:
■ Hammer tunnelling
■ Foundry cleaning
■ Underwater operations
■ Operations in extremely low or high temperatures
■ Use of special hydraulic fluids
■ Hammer operations with special carrier (extra long boom etc.)
■ Other special conditions
That may require modifications to attachment, special operating techniques, in-
creased maintenance or special wear items.
In case of special conditions of use, please consult your local dealer for instructions.
The hammer as a standard assembly, must not be used under water. If water
fills the space where the piston strikes the tool, a strong pressure wave is gen-
erated and the hammer may be damaged.
To Next Page
Loading...