OPERATION - Page 5© 2005 SANDVIK TAMROCK CORP.
ForewordS 83 STD
This symbol identifies prohibited action or hazardous location. Failure to under-
stand and obey this safety warning could result in injury to you or others, and could
also cause damage to equipment. See illustration 2.
This symbol identifies correct and recommended action. See illustration 3.
1.3 IMPORTANT SAFETY INFORMATION
Basic safety precautions are outlined in the "Safety" section of this manual and in
the description of operations where hazards exist. Warning labels have also been put
on the machine to provide instructions and to identify specific hazards which if not
observed could cause bodily injury or death to you or other persons. These warnings
in the guide and on the machine labels are identified by the warning symbol.
To use the attachment correctly, you must also be a competent operator of the carrier
machine. Do not use or install it if you can not use the carrier machine properly. The
attachment is a powerful tool. If used without proper care, it can cause damage.
Do not rush when you are learning to use the product. Take your time and most im-
portantly, take it safely. Do not guess. If there is anything you do not understand,
ask your local dealer. He will be pleased to advise you.
Improper operation, lubrication or maintenance of this machine can be dangerous
and could result in injury.
Do not operate this machine until you read and understand the instructions in this
manual.
Do not perform any lubrication and maintenance on this machine until you read and
understand the instructions in this manual.
To Next Page
Loading...